Detailed Product Description

To use your Bluetooth Headset for Motorcycle helmet, please follow these simple steps:

To charge your Bluetooth Headset, Prior to using the hands-free car kit, it is recommendable to charge the battery,( charging while working) ).

Step Process:

1.        Turn on the device

Press function key(answer key)  for 6 seconds (approx.) until LED flash between Blue and Red LED, it is on searching mode.

If you have paired mobile phone and authorized before, it will find the mobile phone and connected 

2.  Pairing bluetooth mobile phone

If it is the first time to use bluetooth headset, after Blue LED and Red LED flash over (about 1 minutes), to use mobile phone searching for bluetooth headset.

3. Enable mobile phone searching for device function

Please refer to mobile phone user manual

After searching over, the mobile phone will display all bluetooth devices.

4. According to mobile phone prompt information, select Moto Headset in device list

5. To confirm device, input password 0000

(1) Some mobile phone can connect to the device automatically after paired successfully (Such as Nokia)

(2) Some mobile phone can not connect to the device after paired successfully(such as Siemens mobile), It needs to connect by manual.

6.Press Return to go back to your mobile phone menu.

OPERATION:

(a)      To Answer a Call:

When a call is in, a ringing tone will come out of this unit. Press Talk to answer a call. If phone is set under auto answering mode, user neednt press Talk to access calls. Itll be divert to car kit automatically. Once its under talking status, Blue LED on.

(b)     Not to Answer a Call:

When a call is in, a ringing tone will come out of this unit. If user doesnt intend to answer this call, constantly press Vol - for 3 seconds until ringing tone is off.

(c) Dialing out:

   After pairing is done, user may dial out numbers through phones and talk through this unit. During conversation, Blue LED is on.

(d) Volume Adjustment:

   Simply adjust Vol+ or Vol- button to adjust volume.

(e To disconnect Bluetooth connection between phones and headset:

   After completion of pairing, this unit is under Bluetooth connection mode-Blue LED blinks every 3 seconds. To remove connection, please operate disconnection through the pre-connected phone. Procedure is Menu/Bluetooth/View active device/Select/Car Kit/Disconnection.)Mean while this unit will resume stand-by mode and ready for connection again.

If you are unable to connect your bluetooth headset with mobile phone , Please try the following:

(a)      Ensure the headset is paired with your mobile phone

(b)     Ensure your mobile phones Bluetooth feature is active, Please refer to your mobile phone user guide for specific instruction.

(c)      Ensure the headset is within a maximum of 10 meters of your mobile phone and there are no obstructions such as wall or other electronic device in between as it may cause shorter or interface transmission.

The Bluetooth headset is compliant with and adopts the bluetooth specification V2.0 however, interoperability between the device and other Bluetooth enable products is not guaranteed because it depends on compatibility. For more information on the compatibility between the device with other Bluetooth enable product , please check with the manufacturer/importer

Product Specification:

Bluetooth Specification : Version 2.0 class 2 

Bluetooth Profile support : Headset & Hands-free Profile

Operating Frequency Band: 2.402 to 2.480GHx

Recharable Polymer Battery: 3.7V DC,150mAh

DC Charger             : DC 5 TO 6V , 270mA