Detailed Product Description

MOTORCYCLE TALKIE WITH BLUETOOTH HEADSET

Communication Between driver and passenger as well as Bluetooth headset available

Installation:

A: Battery: The motorcycle uses Li-ion battery, so please charge the battery prior to using it. If after a long period of use, LED(4) becomes dim, the volume becomes low, or audio quality is not clear, please charge the battery.

B: Headset: The speaker and mouthpiece are integrated, No drilling of holes or use of tools is required , simply attach the headset to the helmet lining as close to the ear as possible, using the Velcro already fitted,. Adjust the mouthpiece to the optimum position. Plug the headset wire into the control box (2+3)

Operation:

A: The on/off control wheel switch the power of the intercom and bluetooth headset, Please turn on the two wheel during uses. Please test the intercom after fitting the helmet. Making sure that the audio quality is clear(adjust the mouthpiece position) and that the volume is comfortable( adjust the volume control wheel).

 B: the driver headset could use the bluetooth headset to answer /dial a telephone. Before use he bluetooth headset, the drivers bluetooth mobilephone shall pair with bluetooth priority (the detail see the attachment). When a call is in, the internal communication will be stop automatically , press the talk button (7) to answer a call. After the telephone finish, about 10s delay, the intercom will be restored automatically.

C: If the Bluetooth mobile phone support MP3 play, both the driver and pillionrider headset could enjoy music. The volume could be adjust by Vol+ and Vol-.  The pillionrider headset could be off by turn off ON/OFF(5)

In order to avoid the interfere from mobile phone, please keep the motorcycle talkie away from the mobile phone 30cm away.       

Notice:

During the charge, the red power indicator will be on, after the charge finish, the indicator will be off.

Attachment:

  The step process of bluetooth headset pairing with Bluetooth mobile phone

1.      Turn on the device, two switcher should be on ( ON/OFF Bluetooth headset and ON/OFF pillionrider 

Blue and Red LED flash alternatively, it is on searching mode.

2.  If it is the first time to use Bluetooth headset, after Blue LED and Red LED flash over (about 30s ), to use mobile phone searching for Bluetooth headset.

3. Enable mobile phone searching for device function

Please refer to mobile phone user manual

After searching over, the mobile phone will display all Bluetooth devices.

4. According to mobile phone prompt information, select CAR KIT in device list

5. To confirm device, input password 0000

6. Press Return to go back to your mobile phone menu and connect the bluetooth  headset