Detailed Product Description

BLUETOOTH MOTORCYCLE TALKIE

Communication between driver A and driver with Bluetooth, this product consist of Part A and Part B, of which Part A could be used as Bluetooth headset. The effective intercommunication distance is 10m. It is also suit for bicycle rider.

Installation:

A: Battery: The motorcycle uses Li-ion battery, so please charge the battery prior to using it. If after a long period of use, the volume becomes low, or audio quality is not clear, please charge the battery.

B: Headset: The speaker and mouthpiece are integrated, No drilling of holes or use of tools is required , simply attach the headset to the helmet lining as close to the ear as possible, using the Velcro already fitted,. Adjust the mouthpiece to the optimum position. Plug the headset wire into the control box

Operation:

A: intercom

Turn on the power of  Part A and Part B, the status indicator will flash for a few minutes, usually, they will connect each other automatically, if Part A and Part B do not connect automatically, short press Part B talk button, then Part B will search Part A and connect.

B: Bluetooth Headset.

Only Part A is work, and the part B is off , the part A headset could use the bluetooth headset to answer /dial a telephone. Before use he bluetooth headset, the Part As bluetooth mobilephone shall paired with bluetooth priority (the detail see the attachment). When a call is in, only press the talk button to answer a call. If the Bluetooth mobile phone support MP3 play, the Part A could enjoy music.

During standby status, press part A talk button, it will disconnect with bluetooth mobile phone and Press the button again, it will connect with bluetooth mobile phone.

Notice:

During the charge, the red power indicator will be on, after the charge finish, the indicator will be off.

Attachment:

  The step process of bluetooth headset pairing with Bluetooth mobile phone

1.      Turn on the device, two switcher should be on ( ON/OFF Bluetooth headset and ON/OFF pillionrider 

Green and Red LED flash alternatively, it is on searching mode.

2.  If it is the first time to use Bluetooth headset, after Green LED and Red LED flash over (about 30s ), to use mobile phone searching for Bluetooth headset.

3. Enable mobile phone searching for device function

Please refer to mobile phone user manual

After searching over, the mobile phone will display all Bluetooth devices.

4. According to mobile phone prompt information, select Moto Headset in device list

5. To confirm device, input password 0000

6. Press Return to go back to your mobile phone menu and connect the bluetooth  headset